Basic Type Kammprofile Gaskets
Basic type Kammprofile gaskets Kammprofile gaskets we also called camprofile gasket, serrated gasket, grooved metal gasket, grooved gasket, metal kammprofile gasket, kammprofile metal gasket. The Kammprofile gasket is comprised of a concentrically serrated solid metal core with a soft,...
Basic type Kammprofile gaskets
Kammprofile gaskets we also called camprofile gasket, serrated gasket, grooved metal gasket, grooved gasket, metal kammprofile gasket, kammprofile metal gasket.
The Kammprofile gasket is comprised of a concentrically serrated solid metal core with a soft, conformable sealing material bonded to each face. The soft facing material provides low stress gasket seating, while the serrated geometry of the metal core enhances sealing performance by inducing stress concentrations on the sealing surfaces. The serrations minimize lateral movement of the facing material, while the metal core provides rigidity and blowout resistance. The gasket exhibits excellent compressibility and recovery characteristics, maintaining joint tightness under pressure and temperature fluctuations, temperature differential across the flange face, flange rotation, bolt stress relaxation, and creep. Suitable from vacuum to extremely high pressure applications.
Style No: RS3-PN
RS3-PN is manufactured without a guide ring for tongue and groove, or recessed flange applications such as male and female. It is typically used in heat exchanger applications and applied as an upgrade to double jacketed gaskets. It is highly suggested to have the nubbin(if present ) machined out when applying Kammpro RS3-PN in heat exchanger applications..
Where pass partitions are required, they are also kammprofiled and laminated. They are the same thickness as the ring, and securely held in place with welds.
Kammprofile RS3-PN dimensions can be the same as Style RS1-R gaskets that are seated in large male/female, large tongue/groove, and small tongue/groove joints. Technically, the dimensions that are specified for large spiral wound ASME B16.20 for ASME B16.47 Series A and B flanges can still apply for the Kammprofile Gaskets per RS3-ZG/RS3-ZA design.
Dimensions for Kammprofile RS3-ZG/RS3-ZA per EN 12560-6 to Suit ASME B16.5 Flanges
More information, please contact us.